Driver.ru
Скачать NETGEAR KWGR614 Firmware v.1.0.1.09.25
На этой странице вы можете бесплатно скачать NETGEAR KWGR614 Firmware v.1.0.1.09.25
Категория:Network
Производитель:NETGEAR
Оборудование:NETGEAR KWGR614
Тип программы:Firmware
Название:Firmware
Версия:1.0.1.09.25
Размер файла:1.77Mb
Дата выхода:19 Oct 2006
Система:Firmware
Status:Free
Загрузок:92
Описание:KWGR614 Firmware Version 1.0.0_09.2
This version is for North America Only!
Added the Dynamic L2TP support (in additional to the Static L2TP) for some ISP broadband accesses.
Added the feature to avoid LAN/WAN IP configuration conflict: this version can detect and avoid the installation problem automatically when the WAN side uses the conflicting IP address configuration as the LAN side.
The 1st release of the NA (Northern American) firmware compliant with the FCC requirement: the wireless region is fixed to US, and only channel 1~channel 11 selection allowed. The wireless radio is ON by default. The default Time Zone is US.
Intel ViiV certifiable: implemented the hidden page (router-info.htm) for the access of the Intel ViiV management software.
The 1st release of the WW (worldwide) firmware for EU, AU, etc (except US)
SIP ALG supported for VoIP applications
Added the system recovery capability: In case the flash image is damaged (because of improper or interrupted upgrade process, or bad firmware image programmed by the open source developers, etc), this version allows re-loading the firmware via TFTP. The procedure is:
Power off the unit
Press and hold the RESET button at the rear panel
Power on to reboot the unit
Monitor the Test LED, and keep holding the RESET button until the Test LED changes from blinking to steady ON (which means the boot loader has entered the TFTP recovery mode)
Connect the PC to the LAN port of the unit
Transmit the firmware image file to the unit
For Windows PC, enter the DOS command: tftp -i 192.168.1.1 PUT KWGR614_XXX.bi
For a Linux PC, use the command: tftp -m binary 192.168.1.1 -c put KWGR614_XXX.bi
where the 192.168.1.1 is the units LAN IP address and KWGR614_XXX.bix is the firmware image file to transmit.
Monitor the Test LED. When it starts blinking, the recovery procedure is complete
Power cycle to reboot KWGR61
Repeat the above steps if the procedure is interrupted or failed.
This version is for North America Only!
Added the Dynamic L2TP support (in additional to the Static L2TP) for some ISP broadband accesses.
Added the feature to avoid LAN/WAN IP configuration conflict: this version can detect and avoid the installation problem automatically when the WAN side uses the conflicting IP address configuration as the LAN side.
The 1st release of the NA (Northern American) firmware compliant with the FCC requirement: the wireless region is fixed to US, and only channel 1~channel 11 selection allowed. The wireless radio is ON by default. The default Time Zone is US.
Intel ViiV certifiable: implemented the hidden page (router-info.htm) for the access of the Intel ViiV management software.
The 1st release of the WW (worldwide) firmware for EU, AU, etc (except US)
SIP ALG supported for VoIP applications
Added the system recovery capability: In case the flash image is damaged (because of improper or interrupted upgrade process, or bad firmware image programmed by the open source developers, etc), this version allows re-loading the firmware via TFTP. The procedure is:
Power off the unit
Press and hold the RESET button at the rear panel
Power on to reboot the unit
Monitor the Test LED, and keep holding the RESET button until the Test LED changes from blinking to steady ON (which means the boot loader has entered the TFTP recovery mode)
Connect the PC to the LAN port of the unit
Transmit the firmware image file to the unit
For Windows PC, enter the DOS command: tftp -i 192.168.1.1 PUT KWGR614_XXX.bi
For a Linux PC, use the command: tftp -m binary 192.168.1.1 -c put KWGR614_XXX.bi
where the 192.168.1.1 is the units LAN IP address and KWGR614_XXX.bix is the firmware image file to transmit.
Monitor the Test LED. When it starts blinking, the recovery procedure is complete
Power cycle to reboot KWGR61
Repeat the above steps if the procedure is interrupted or failed.
Правовая информация:Все програмное обеспечение, размещённое на Driver.ru является бесплатным. Все названия и торговые марки принадлежат их владельцам.
Внимание:Некоторые программы получены из непроверенных источников. Мы не гарантируем их совместимость и работоспособность. Всегда проверяйте загруженные файлы с помощью антивирусных программ. Мы не несём никакой ответственности за возможные потери, возникшие в результате установки загруженных программ. Загрузка файла с Driver.ru обозначает вашу информированность об этом и согласие с данными условиями.
Похожие файлы:
Тип программы:Firmware
Версия:1.0.1.10.17
Система:Firmware
Описание:KWGR614 Firmware Version 1.0.1_10.17 WW
This version is for use OUTSIDE North America Only!
Fixed a Block Site issue which caused Internet re-connection in the DHCP mode.
Fixed the Web GUI issue that changing the wireless setting might fail the Web GUI access after router reboot.
Fixed a LAN IP address re-assignment bug under a specific LAN/WAN IP address conf... Скачать NETGEAR KWGR614 Firmware v.1.0.1.10.17
This version is for use OUTSIDE North America Only!
Fixed a Block Site issue which caused Internet re-connection in the DHCP mode.
Fixed the Web GUI issue that changing the wireless setting might fail the Web GUI access after router reboot.
Fixed a LAN IP address re-assignment bug under a specific LAN/WAN IP address conf... Скачать NETGEAR KWGR614 Firmware v.1.0.1.10.17