Driver.ru
Скачать Драйвер для HP zx6000 U160 SCSI controller VPD (Vital Product Data) v.1.00.03 для HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium), Red Hat Enterprise Linux WS 2.1-Itanium
На этой странице вы можете бесплатно скачать Драйвер для HP zx6000 U160 SCSI controller VPD (Vital Product Data) v.1.00.03
Категория:PC
Производитель:HP
Оборудование:HP zx6000
Тип программы:Software
Название:U160 SCSI controller VPD (Vital Product Data)
Версия:1.00.03
Размер файла:80.5Kb
Дата выхода:29 Jun 2004
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium), Red Hat Enterprise Linux WS 2.1-Itanium
Status:Free
Загрузок:7
Описание:U160 SCSI controller VPD (Vital Product Data) for HP zx6000
Type: Utility - Storage Controlle
NOTE: These instructions apply only if you have installed one of th
following Hewlett-Packard SCSI host bus adapters (HBAs) in your syste
from HP Itanium Processor Family
 
A6828A - Single channel Ultra160 SCSI HBA for HP-U
 
A6829A - Dual channel Ultra160 SCSI HBA for HP-U
 
A8686A - Single channel Ultra160 SCSI HBA for HP-UX (workstations only
 
A7059A - Single channel Ultra160 SCSI HBA for Windows and Linu
 
A7060A - Dual channel Ultra160 SCSI HBA for Windows and Linu
 
A5159B - Dual channel Fast Wide Differential SCSI HBA for HP-UX
Windows, and Linu
 
 
***** EFI NVRAM Vital Product Data Utility Version 01.00.03 ******
 
Initial Release: April 29, 200
 
* General Changes
 
(None, release
 
* Functionality Changes
 
(None, initial release
 
* Restrictions
 
- HP Integrity rx8620 Server and HP Integrity rx7620 Server
 
To enable faster booting, the system firmware of HP Integrit
rx8620 Server and HP Integrity rx7620 Server does not auto sca
PCI devices with an optional ROM. Therefore, to run the EF
utility, you must first add the device to the table of boo
devices using the "search" and "map" commands. 
 
For more information, see the "Using the U160 SCSI Add-On Car
on HP Integrity rx8620 Server and HP Integrity rx7620 Server"
document (HP Part Number 5971-4235)
 
- In the HP Integrity rx5670 system, the following SCSI chip
(53C896), in addition to other SCSI chips in the system, ar
displayed
 
NOTE: "#" is replaced by a choice number. 
 
These two SCSI chips do not have any vital product data applicabl
for this utility. Do not select either of the chips, else th
utility will hang
 
 
Vendor Devic
Choice ID ID Seg Bus Dev Fun
---- ------ -------- -------- ----- ----- ----
# 0x1000 0x000B 0x00 0x00 0x02 0x0
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x000B 0x00 0x00 0x02 0x0
LSI Logic, Inc. 53C896 Ultra2 SCS
 
 
- If there are many SCSI HBAs in the system, then the SCSI chip
choice list may scroll by too fast, thus hiding the informatio
at the top of the choice list. Use the Pause key to avoid thi
problem
 
- In the SCSI chips choice list, you cannot select the SCSI chip
that have a choice number greater than 999
 
To select SCSI chips that originally have a choice number greate
than 999, remove HBAs that are associated with the first 99
entries in the SCSI chips choice list
 
 
******************* Using the EFI VPD Utility *********************
 
This document provides instructions for using the Extended Firmwar
Interface (EFI) based LSI Logic VPD utility. The EFI NVRAM VPD utilit
is used for displaying vital product data on HP HBAs based on LS
Logic's 53C876 and 53C1010 SCSI chips
 
 
******************** Features *************************************
 
- Displays the Vital Product Data on an HBA
 
 
******************** Description ***********************************
 
This utility allows you to display the Vital Product Data on an H
HBA. The executable file name of the EFI utility is EFIHPVPD.EFI
 
 
******************** Preparation ***********************************
 
When you boot the EFI enabled systems, the diskette or CD-RO
containing the EFI utility needs to be in the drive to allow devic
mapping. The EFI utility will be located in the root directory or i
a subdirectory on the diskette or CD-ROM
 
Boot the system to the EFI shell prompt. The floppy diskette drive o
CD-ROM drive should appear in the list of mapped devices as "fs0"
 
In systems with a floppy drive, change to this device by typin
"fs0:"
 
 
******************* Menu Driven *******************************
 
If the EFI utility is located in the root directory, enter th
"efihpvpd" command at the prompt as illustrated below; otherwise
move to the directory in which this file is located and continue
 
NOTE: As mentioned in the "Restrictions" section, you mus
execute the following two commands at the prompt befor
executing the "efihpvpd" command on HP Integrity rx862
Server or HP Integrity rx7620 Server
 
fs0:> search al
fs0:> map -
 
If you fail to execute these two commands, the followin
message appears, even if the system has an HBA
 
"ERROR: No LSI Logic 8xx/1010 boards found."
 
 
fs0:> efihpvp
 
The following main window screen displays
 
 
EFIHPVPD-1.00.0
 
Vendor Devic
Choice ID ID Seg Bus Dev Fun
------ -------- -------- ----- ----- ----- ------ 
1 0x1000 0x0021 0x00 0x40 0x01 0x0
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
2 0x1000 0x0021 0x00 0x40 0x01 0x0
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
3 0x1000 0x000F 0x01 0xC0 0x01 0x0
LSI Logic, Inc. 53C875/53C876 Ultra-Wide SCS
4 0x1000 0x000F 0x01 0xC0 0x01 0x0
LSI Logic, Inc. 53C875/53C876 Ultra-Wide SCS
 
5 - Refres
 
Which chip/adapter (0 to quit)
 
 
The version of the EFI utility is shown at the upper-left corner. Th
main window allows you to choose the SCSI chip corresponding to th
path where you want to perform the selected tasks. Dual channel card
will have two entries displayed on this screen, one for each SCS
chip
 
In the example above, the system has two HBAs - one on the 0x40 bus i
PCI segment 0 and one on the 0xC0 bus in PCI segment 1
 
The HBAs on both the buses, 0x40 and 0xC0, are dual-channel HBA
(func 0x00 and func 0x01)
 
The "SYMC1010" following "LSI Logic, Inc." indicates that the HBAs us
the 53C1010 LSI SCSI chip, and the "53C875/53C876" followin
"LSI Logic, Inc." indicates that the HBAs use the 53C876 LSI SCS
chip. This EFI utility supports both these chips
 
At the "Which chip/adapter (0 to quit)?" prompt, enter the Choic
number that corresponds to the chip on which you want to display th
Vital Product Data. Refer to the following example where chip 1 i
selected
 
Which chip/adapter (0 to quit)?
 
 
The following menu is displayed
 
Hewlett-Packard NVRAM VPD Utilit
EFIHPVPD-1.00.03 (04.29.2003
Copyright (c) 2003 LSI Logic Corporation. All rights reserved
 
*****************************************************************
 
OPTION
a - Formatted View of VPD Entrie
b - Hex View of VPD Are
 
MIS
z - Change Current PCI chip/adapte
q - Qui
 
Selection
 
 
The banner at the top of the option menu displays the version of th
EFI NVRAM VPD utility and the release date
 
The details on each of the menu choices are as follows
 
a - Formatted View of VPD Entrie
Displays VPD according to the keywords
 
b - Hex View of VPD Are
Displays VPD in hexadecimal, with the option of saving the dat
to a file
 
z - Change Current PCI chip/adapte
Takes you back to the main menu without exiting the utility, s
that you can select a different HBA
 
At the "Selection:" prompt, enter the Choice number. Refer to th
following example where option "a" is selected
 
Selection:
 
 
The following screen is displayed to show various vital product data
 
 
Formatted Display Of Current VPD Entrie
*******************************************************************
 
ID String = A6829A PCI(4X) DUAL CHANNEL ULTRA160 SCSI ADAPTE
(PN) Part Number..................... A6829-6000
(EC) Engineering Change Level........ A-414
(V0) Miscellaneous Information....... PW=15W PCI=64BIT,66MH
(SN) Serial Number................... 52SY44248
(RV) Checksum and Reserved........... 0x92
(V1) EFI Driver Version.............. PCI-EFI-1.02.00.0
 
Press ENTER to continue.
Type: Utility - Storage Controlle
NOTE: These instructions apply only if you have installed one of th
following Hewlett-Packard SCSI host bus adapters (HBAs) in your syste
from HP Itanium Processor Family
 
A6828A - Single channel Ultra160 SCSI HBA for HP-U
 
A6829A - Dual channel Ultra160 SCSI HBA for HP-U
 
A8686A - Single channel Ultra160 SCSI HBA for HP-UX (workstations only
 
A7059A - Single channel Ultra160 SCSI HBA for Windows and Linu
 
A7060A - Dual channel Ultra160 SCSI HBA for Windows and Linu
 
A5159B - Dual channel Fast Wide Differential SCSI HBA for HP-UX
Windows, and Linu
 
 
***** EFI NVRAM Vital Product Data Utility Version 01.00.03 ******
 
Initial Release: April 29, 200
 
* General Changes
 
(None, release
 
* Functionality Changes
 
(None, initial release
 
* Restrictions
 
- HP Integrity rx8620 Server and HP Integrity rx7620 Server
 
To enable faster booting, the system firmware of HP Integrit
rx8620 Server and HP Integrity rx7620 Server does not auto sca
PCI devices with an optional ROM. Therefore, to run the EF
utility, you must first add the device to the table of boo
devices using the "search" and "map" commands. 
 
For more information, see the "Using the U160 SCSI Add-On Car
on HP Integrity rx8620 Server and HP Integrity rx7620 Server"
document (HP Part Number 5971-4235)
 
- In the HP Integrity rx5670 system, the following SCSI chip
(53C896), in addition to other SCSI chips in the system, ar
displayed
 
NOTE: "#" is replaced by a choice number. 
 
These two SCSI chips do not have any vital product data applicabl
for this utility. Do not select either of the chips, else th
utility will hang
 
 
Vendor Devic
Choice ID ID Seg Bus Dev Fun
---- ------ -------- -------- ----- ----- ----
# 0x1000 0x000B 0x00 0x00 0x02 0x0
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x000B 0x00 0x00 0x02 0x0
LSI Logic, Inc. 53C896 Ultra2 SCS
 
 
- If there are many SCSI HBAs in the system, then the SCSI chip
choice list may scroll by too fast, thus hiding the informatio
at the top of the choice list. Use the Pause key to avoid thi
problem
 
- In the SCSI chips choice list, you cannot select the SCSI chip
that have a choice number greater than 999
 
To select SCSI chips that originally have a choice number greate
than 999, remove HBAs that are associated with the first 99
entries in the SCSI chips choice list
 
 
******************* Using the EFI VPD Utility *********************
 
This document provides instructions for using the Extended Firmwar
Interface (EFI) based LSI Logic VPD utility. The EFI NVRAM VPD utilit
is used for displaying vital product data on HP HBAs based on LS
Logic's 53C876 and 53C1010 SCSI chips
 
 
******************** Features *************************************
 
- Displays the Vital Product Data on an HBA
 
 
******************** Description ***********************************
 
This utility allows you to display the Vital Product Data on an H
HBA. The executable file name of the EFI utility is EFIHPVPD.EFI
 
 
******************** Preparation ***********************************
 
When you boot the EFI enabled systems, the diskette or CD-RO
containing the EFI utility needs to be in the drive to allow devic
mapping. The EFI utility will be located in the root directory or i
a subdirectory on the diskette or CD-ROM
 
Boot the system to the EFI shell prompt. The floppy diskette drive o
CD-ROM drive should appear in the list of mapped devices as "fs0"
 
In systems with a floppy drive, change to this device by typin
"fs0:"
 
 
******************* Menu Driven *******************************
 
If the EFI utility is located in the root directory, enter th
"efihpvpd" command at the prompt as illustrated below; otherwise
move to the directory in which this file is located and continue
 
NOTE: As mentioned in the "Restrictions" section, you mus
execute the following two commands at the prompt befor
executing the "efihpvpd" command on HP Integrity rx862
Server or HP Integrity rx7620 Server
 
fs0:> search al
fs0:> map -
 
If you fail to execute these two commands, the followin
message appears, even if the system has an HBA
 
"ERROR: No LSI Logic 8xx/1010 boards found."
 
 
fs0:> efihpvp
 
The following main window screen displays
 
 
EFIHPVPD-1.00.0
 
Vendor Devic
Choice ID ID Seg Bus Dev Fun
------ -------- -------- ----- ----- ----- ------ 
1 0x1000 0x0021 0x00 0x40 0x01 0x0
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
2 0x1000 0x0021 0x00 0x40 0x01 0x0
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
3 0x1000 0x000F 0x01 0xC0 0x01 0x0
LSI Logic, Inc. 53C875/53C876 Ultra-Wide SCS
4 0x1000 0x000F 0x01 0xC0 0x01 0x0
LSI Logic, Inc. 53C875/53C876 Ultra-Wide SCS
 
5 - Refres
 
Which chip/adapter (0 to quit)
 
 
The version of the EFI utility is shown at the upper-left corner. Th
main window allows you to choose the SCSI chip corresponding to th
path where you want to perform the selected tasks. Dual channel card
will have two entries displayed on this screen, one for each SCS
chip
 
In the example above, the system has two HBAs - one on the 0x40 bus i
PCI segment 0 and one on the 0xC0 bus in PCI segment 1
 
The HBAs on both the buses, 0x40 and 0xC0, are dual-channel HBA
(func 0x00 and func 0x01)
 
The "SYMC1010" following "LSI Logic, Inc." indicates that the HBAs us
the 53C1010 LSI SCSI chip, and the "53C875/53C876" followin
"LSI Logic, Inc." indicates that the HBAs use the 53C876 LSI SCS
chip. This EFI utility supports both these chips
 
At the "Which chip/adapter (0 to quit)?" prompt, enter the Choic
number that corresponds to the chip on which you want to display th
Vital Product Data. Refer to the following example where chip 1 i
selected
 
Which chip/adapter (0 to quit)?
 
 
The following menu is displayed
 
Hewlett-Packard NVRAM VPD Utilit
EFIHPVPD-1.00.03 (04.29.2003
Copyright (c) 2003 LSI Logic Corporation. All rights reserved
 
*****************************************************************
 
OPTION
a - Formatted View of VPD Entrie
b - Hex View of VPD Are
 
MIS
z - Change Current PCI chip/adapte
q - Qui
 
Selection
 
 
The banner at the top of the option menu displays the version of th
EFI NVRAM VPD utility and the release date
 
The details on each of the menu choices are as follows
 
a - Formatted View of VPD Entrie
Displays VPD according to the keywords
 
b - Hex View of VPD Are
Displays VPD in hexadecimal, with the option of saving the dat
to a file
 
z - Change Current PCI chip/adapte
Takes you back to the main menu without exiting the utility, s
that you can select a different HBA
 
At the "Selection:" prompt, enter the Choice number. Refer to th
following example where option "a" is selected
 
Selection:
 
 
The following screen is displayed to show various vital product data
 
 
Formatted Display Of Current VPD Entrie
*******************************************************************
 
ID String = A6829A PCI(4X) DUAL CHANNEL ULTRA160 SCSI ADAPTE
(PN) Part Number..................... A6829-6000
(EC) Engineering Change Level........ A-414
(V0) Miscellaneous Information....... PW=15W PCI=64BIT,66MH
(SN) Serial Number................... 52SY44248
(RV) Checksum and Reserved........... 0x92
(V1) EFI Driver Version.............. PCI-EFI-1.02.00.0
 
Press ENTER to continue.
Правовая информация:Все програмное обеспечение, размещённое на Driver.ru является бесплатным. Все названия и торговые марки принадлежат их владельцам.
Внимание:Некоторые программы получены из непроверенных источников. Мы не гарантируем их совместимость и работоспособность. Всегда проверяйте загруженные файлы с помощью антивирусных программ. Мы не несём никакой ответственности за возможные потери, возникшие в результате установки загруженных программ. Загрузка файла с Driver.ru обозначает вашу информированность об этом и согласие с данными условиями.
Похожие файлы:
Тип программы:System and BMC Firmware Update
Версия:2.21 EFI
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:System and BMC Firmware Update for HP zx6000
Type: Firmware - System
System and BMC Firmware Скачать HP zx6000 System and BMC Firmware Update v.2.21 EFI
Type: Firmware - System
System and BMC Firmware Скачать HP zx6000 System and BMC Firmware Update v.2.21 EFI
Тип программы:Firmware (EFI Boot Service Driver)
Версия:1.04.01.00
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:Firmware (EFI Boot Service Driver) for HP zx6000
Type: Firmware - Controller
Firmware for LSI Logic U160 SCSI controller Скачать HP zx6000 Firmware (EFI Boot Service Драйвер) v.1.04.01.00
Type: Firmware - Controller
Firmware for LSI Logic U160 SCSI controller Скачать HP zx6000 Firmware (EFI Boot Service Драйвер) v.1.04.01.00
Тип программы:Management Processor Card Firmware
Версия:E.02.29
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:Management Processor Card Firmware for HP zx6000
Type: Firmware - Management
Management Processor Card Firmware Скачать HP zx6000 Management Processor Card Firmware v.E.02.29
Type: Firmware - Management
Management Processor Card Firmware Скачать HP zx6000 Management Processor Card Firmware v.E.02.29
Название:ATI FireGL Driver (IA-64 Itanium)
Версия:8.02.3 Rev. A
Система:Windows XP 64-bit
Описание:ATI FireGL Driver (IA-64 Itanium) for HP zx6000
Type: Driver - Graphics - AMD
This SoftPaq contains the driver for ATI FireGL X1/Z1 graphics for the listed workstation models and operating systems. Скачать HP zx6000 ATI FireGL Драйвер (IA-64 Itanium) v.8.02.3 Rev. A
Type: Driver - Graphics - AMD
This SoftPaq contains the driver for ATI FireGL X1/Z1 graphics for the listed workstation models and operating systems. Скачать HP zx6000 ATI FireGL Драйвер (IA-64 Itanium) v.8.02.3 Rev. A
Тип программы:Offline U160 SCSI Controller Firmware Update Utility
Версия:1.01.13.00
Система:Windows XP 64-bit, HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:Offline U160 SCSI Controller Firmware Update Utility for HP zx6000
Type: Utility - Storage Controller
NOTE: These instructions apply only if you have installed one of the
following Hewlett-Packard SCSI host bus adapters (HBAs) in your HP
system from Itanium Processor Family:
A6828A - Single channel Ultra160 SCSI HBA for HP-UX... Скачать HP zx6000 Offline U160 SCSI Controller Firmware Update Utility v.1.01.13.00
Type: Utility - Storage Controller
NOTE: These instructions apply only if you have installed one of the
following Hewlett-Packard SCSI host bus adapters (HBAs) in your HP
system from Itanium Processor Family:
A6828A - Single channel Ultra160 SCSI HBA for HP-UX... Скачать HP zx6000 Offline U160 SCSI Controller Firmware Update Utility v.1.01.13.00
Тип программы:Firmware (EFI Boot Service Driver)
Версия:1.03.01.00
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:Firmware (EFI Boot Service Driver) for HP zx6000
Type: Firmware - Controller
Firmware for LSI Logic U160 SCSI controller Скачать HP zx6000 Firmware (EFI Boot Service Драйвер) v.1.03.01.00
Type: Firmware - Controller
Firmware for LSI Logic U160 SCSI controller Скачать HP zx6000 Firmware (EFI Boot Service Драйвер) v.1.03.01.00
Название:NVIDIA IA-64 Graphics Driver
Версия:53.18 Rev. 1
Система:Windows XP 64-bit
Описание:NVIDIA IA-64 Graphics Driver for HP zx6000
Type: Driver - Graphics - Nvidia
This contains the NVIDIA graphics driver for the Itanium workstation models and operating systems listed. Скачать HP zx6000 NVIDIA IA-64 Graphics Драйвер v.53.18 Rev. 1
Type: Driver - Graphics - Nvidia
This contains the NVIDIA graphics driver for the Itanium workstation models and operating systems listed. Скачать HP zx6000 NVIDIA IA-64 Graphics Драйвер v.53.18 Rev. 1
Тип программы:BIOS
Версия:5.00 Rev 1
Система:BIOS
Описание:BIOS for HP zx6000
Type: BIOS
This contains the EFI version of the NVIDIA Video BIOS Flash Utility for the Itanium-based (IA-64) workstations listed. This flash utility may be used with the same NVIDIA video BIOS images that are provided for x86 systems. Скачать HP zx6000 BIOS v.5.00 Rev 1
Type: BIOS
This contains the EFI version of the NVIDIA Video BIOS Flash Utility for the Itanium-based (IA-64) workstations listed. This flash utility may be used with the same NVIDIA video BIOS images that are provided for x86 systems. Скачать HP zx6000 BIOS v.5.00 Rev 1
Название:KYE Systems Corp SoundMax 5.1 Audio and Joystick driver
Версия:5.0.1319.209 Rev. A
Система:Windows XP 64-bit
Описание:KYE Systems Corp SoundMax 5.1 Audio and Joystick driver for HP zx6000
Type: Operating System - Enhancements
Enables support for the KYE Systems Corp SoundMax 5.1 Audio and Joystick cards. This driver is to be used in the Windows XP 64-Bit edition 2003 for Itanium. Скачать HP zx6000 KYE Systems Corp SoundMax 5.1 Audio and Joystick драйвер v.5.0.1319.209 Rev. A
Type: Operating System - Enhancements
Enables support for the KYE Systems Corp SoundMax 5.1 Audio and Joystick cards. This driver is to be used in the Windows XP 64-Bit edition 2003 for Itanium. Скачать HP zx6000 KYE Systems Corp SoundMax 5.1 Audio and Joystick драйвер v.5.0.1319.209 Rev. A
Тип программы:BIOS
Версия:1.04 Rev. A
Система:BIOS
Описание:BIOS for HP zx6000
Type: BIOS
This contains the ATI Radeon 7000 Video BIOS and EFI Flash Utility for the workstations listed below. Скачать HP zx6000 BIOS v.1.04 Rev. A
Type: BIOS
This contains the ATI Radeon 7000 Video BIOS and EFI Flash Utility for the workstations listed below. Скачать HP zx6000 BIOS v.1.04 Rev. A