Driver.ru
Скачать HP zx6000 Offline U160 SCSI Controller Firmware Update Utility v.1.01.13.00
На этой странице вы можете бесплатно скачать HP zx6000 Offline U160 SCSI Controller Firmware Update Utility v.1.01.13.00
Категория:PC
Производитель:HP
Оборудование:HP zx6000
Тип программы:Firmware
Название:Offline U160 SCSI Controller Firmware Update Utility
Версия:1.01.13.00
Размер файла:131.5Kb
Дата выхода:29 Jun 2004
Система:Windows XP 64-bit, HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium), Red Hat Enterprise Linux WS 2.1-Itanium
Status:Free
Загрузок:6
Описание:Offline U160 SCSI Controller Firmware Update Utility for HP zx6000
Type: Utility - Storage Controlle
 
NOTE: These instructions apply only if you have installed one of th
following Hewlett-Packard SCSI host bus adapters (HBAs) in your H
system from Itanium Processor Family
 
A6828A - Single channel Ultra160 SCSI HBA for HP-U
 
A6829A - Dual channel Ultra160 SCSI HBA for HP-U
 
A8686A - Single channel Ultra160 SCSI HBA for HP-U
(workstations only
 
A7059A - Single channel Ultra160 SCSI HBA for Windows and Linu
 
A7060A - Dual channel Ultra160 SCSI HBA for Windows and Linu
 
A5159B - Dual channel Fast Wide Differential SCSI HBA for HP-UX
Windows, and Linu
 
 
****** EFI Host Bus Adapter Flash Utility Version 01.01.13.00 ******
 
Release date: August 13, 200
 
The EFI Host Bus Adapter (HBA) Flash Utility 01.01.13.00 has th
following major changes in comparison to the 01.01.12.00 version
 
* General Changes
 
(None
 
* Functionality Changes
 
(None
 
* Defects Fixed
 
- Failure on a platform: Immediately after entering the utility, i
is not possible to quit the utility by typing "0"
 
* Restrictions
 
- HP Integrity rx8620 Server and HP Integrity rx7620 Serve
 
To enable faster booting, the system firmware of HP Integrit
rx8620 Server and HP Integrity rx7620 Server does not auto sca
PCI devices with an optional ROM. Therefore, to run the EF
utility, you must first add the device to the table of boo
devices using the "search" and "map" commands
 
For more information, see the "Using the U160 SCSI Add-On Card o
HP Integrity rx8620 Server and HP Integrity rx7620 Server"
document (HP Part Number: 5971-4235)
 
- HP Integrity rx5670 Serve
 
If the HP Integrity rx5670 Server contains a supported HBA, th
following SCSI chips (53C896 and SYMC1010), in addition to othe
SCSI chips, are displayed
 
NOTE: "#" is replaced by a choice number
 
Do not select these four SCSI chips, because they do not hav
flash memory applicable to this utility
 
 
Vendor Devic
Choice ID ID Seg Bus Dev Func Flash Par
---- ------ ------- ------ ----- ----- ----- -----
# 0x1000 0x000B 0x00 0x00 0x02 0x00 Non
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x000B 0x00 0x00 0x02 0x01 Non
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x0021 0x00 0x21 0x01 0x00 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
# 0x1000 0x0021 0x00 0x21 0x01 0x01 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
 
 
- If there are many SCSI HBAs in the system, the SCSI chips choic
list may scroll by too fast, thus hiding the information at th
top of the choice list. Use the Pause key to avoid this problem
 
 
******* EFI Host Bus Adapter Flash Utility Version 01.01.12.00 *****
 
The EFI Host Bus Adapter (HBA) Flash Utility 01.01.12.00 has th
following major changes in comparison to the 01.01.10 version
 
* General Changes
 
- The version number is displayed on the screen containing the SCS
chips choice list
 
- The PCI Segment number is displayed in the SCSI chips choice lis
and the progress message
 
 
* Functionality Changes
 
- When an error occurs, the utility pauses for the keyboard inpu
from the user, instead of a delay and auto continue
 
- The help screen does not hide the first few lines of informatio
by scrolling down
 
- When the utility exits, it displays the "Exit Status Code" tha
explains the success or failure of execution
 
- When the utility exits, it returns a buffer in a global syste
variable. This variable contains the execution status and th
Seg/Bus/Dev entry for adapters that fail the flash process
 
 
* Defects Fixed
 
- Intermittent failure for the "Download New Flash Image" operatio
when flashing a new image to an HBA that uses an AT29C010 flas
memory
 
 
* Restrictions
 
- If the HP Integrity rx5670 system contains a supported HBA, th
following SCSI chips (53C896 and SYMC1010), in addition to othe
SCSI chips, are displayed
 
NOTE: "#" is replaced by a choice number
 
Do not select the following SCSI chips because they do not hav
a flash memory applicable to this utility
 
 
Vendor Devic
Choice ID ID Seg Bus Dev Func Flash Par
---- ------ ------- ------ ----- ----- ----- -----
# 0x1000 0x000B 0x00 0x00 0x02 0x00 Non
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x000B 0x00 0x00 0x02 0x01 Non
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x0021 0x00 0x21 0x01 0x00 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
# 0x1000 0x0021 0x00 0x21 0x01 0x01 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
 
 
- If there are many SCSI HBAs in the system, the SCSI chips choic
list may scroll by too fast, thus hiding the information at th
top of the choice list. Use the Pause key to avoid this problem
 
- In the SCSI chips choice list, you cannot select the SCSI chip
that have a choice number greater than 999
 
To select SCSI chips that originally have a choice number greate
than 999, remove HBAs that are associated with the first 99
entries in the SCSI chips choice list
 
 
********** Using the EFI Host Bus Adapter Flash Utility ***********
 
This document provides instructions for using the Extended Firmwar
Interface (EFI) based LSI Logic flash utility. This EFI flash utilit
is used for flashing and saving firmware images on HP HBAs based o
LSI Logic's 53C876 and 53C1010 SCSI chips
 
 
********************* Features ************************************
 
- Displays the firmware version on an HBA or in a firmware image file
 
- Supports a menu driven mode
 
- Enables you to flash the EFI option ROM images
 
 
***************** Description **************************************
 
This utility allows you to update the HBA flash memory with the LS
Logic EFI driver. New versions of these images are release
periodically
 
Your HBA must have a flash memory to use this utility
 
WARNING: Do not attempt to use this utility to flash binaries othe
than the EFI option ROM images
 
The executable file name of the EFI utility is EFI8XXFL.EFI. Thi
file, and any firmware image file you need, should be stored on
diskette or CD-ROM
 
These files should not be stored on a hard disk, because if the flas
fails, these files cannot be recovered. Moreover, the hard dis
may not be accessible
 
You must execute the EFI utility from a diskette or CD-ROM. Fo
EFI-based systems without a floppy diskette drive, burning the EF
utility and other firmware images onto a CD-ROM will allow prope
execution, but with reduced functionality. In such a situation, yo
will not be able to save an image of the flash memory to the CD-ROM
 
 
************** Preparation **************************************
 
When you boot the EFI enabled systems, the diskette or CD-RO
containing the EFI utility must be in the drive to allow devic
mapping. The EFI utility and firmware image files will be located i
the root directory or in a subdirectory on the diskette or CD-ROM
 
Boot the system to the EFI shell prompt. The floppy diskette drive o
CD-ROM drive should appear in the list of mapped devices as "fs0"
 
In systems with a floppy drive, change to this device by typin
"fs0:"
 
 
************** Menu Driven Mode **********************************
 
If the EFI utility and firmware image files are located in the roo
directory, enter the "efi8xxfl" command at the prompt as illustrate
below; otherwise, move to the directory in which these files ar
located and continue
 
NOTE: As described in "Restrictions" section, you must execut
the following two commands at the prompt before enterin
the "efi8xxfl" command on HP Integrity rx8620 Server o
HP Integrity rx7620 Server
 
fs0:> search al
fs0:> map -
 
If you fail to execute these two commands, the following messag
appears, even if the system has an HBA
 
"ERROR: No LSI Logic 8xx/1010 boards found."
 
 
fs0:> efi8xxf
 
If the EFI utility does not find an HBA with a flashable component
the following message appears
 
ERROR: No LSI Logic 8xx/1010 boards found
Press ENTER to continue..
NOTE: The system needs to be rebooted to ensure system stability
Press ENTER to exit the utility
Exit status code: C00000000000000
 
 
If an HBA with a flashable component is found, the following scree
appears
 
 
EFI8XXFL-1.01.13.0
 
Vendor Devic
Choice ID ID Seg Bus Dev Func Flash Par
------- -------- ------- ----- ------ ----- ------ ---------
1 0x1000 0x0021 0x00 0x15 0x01 0x00 M29F010
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
2 0x1000 0x0021 0x00 0x15 0x01 0x01 M29F010
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
3 0x1000 0x0021 0x00 0x3F 0x01 0x00 Am29F01
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
4 0x1000 0x0021 0x00 0x3F 0x01 0x01 Am29F01
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
5 0x1000 0x0021 0x00 0x21 0x01 0x00 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
6 0x1000 0x0021 0x00 0x21 0x01 0x01 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
7 0x1000 0x0021 0x01 0x16 0x01 0x00 Am29F01
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
 
8 - Refres
 
Which chip/adapter (0 to quit)
 
 
The version of the EFI flash utility is shown at the upper-left corne
of the main window
 
The main window allows you to choose the SCSI chip corresponding t
the path where you want to perform the selected tasks. Dual channe
cards will have two entries displayed on this screen, one for eac
SCSI chip
 
In the example above, the system has four HBAs - one each on th
0x15, 0x3F, and 0x21 buses in PCI segment 0, and one on the 0x16 bu
in PCI segment 1
 
The HBA on bus 0x3F is a dual-channel HBA (func 0x00 and func 0x01
with flash memory part number Am29F010. Since both the channels of
dual channel board share the same flash memory, only one of the path
needs to be chosen
 
If separate updates are performed through both the paths, the flas
memory is not affected. However, be aware that each update overwrite
the existing contents of the flash memory
 
The HBA on bus 0x21 is a dual-channel HBA (func 0x00 and func 0x01
without any flash memory, indicated as "None" under the "Flash Part"
column. The utility will refresh the main window if Choice number
or 6 is selected
 
The segment value of the HBA corresponding to Choice number 7 i
"0x01". This indicates that the HBA resides on PCI segment 1. Th
other HBAs reside on PCI segment 0, as the segment value for othe
HBAs is 0x00
 
The "SYMC1010" following "LSI Logic, Inc." indicates that the HBAs us
the 53C1010 LSI SCSI chip, which is supported by this EFI utility
 
At the "Which chip/adapter (0 to quit)?" prompt, enter the Choic
number that corresponds to the SCSI chip associated with the flas
memory you want to update. Refer to the following example wher
chip 1 is selected
 
Which chip/adapter (0 to quit)?
 
 
The following menu is displayed
 
LSI Logic Corporation EFI 53C8xx/53C1010 FLASH Utility
EFI8XXFL- 1.01.13.00 (08.13.2003
Copyright (c) 2002 LSI Logic Corporation. All rights reserved
 
**************************************************************
FLAS
a - Identify Flash Imag
b - Download New Flash Imag
c - Upload Current Flash Image to a Fil
d - Erase Entire Flash Par
MIS
z - Change Current PCI chip/adapte
q - Qui
 
Selection
 
 
The banner at the top of the option menu displays the version of th
EFI flash utility and the release date
 
The details on each of the menu choices are as follows
 
a Identify Flash Imag
Displays the version number of the image in the flas
memory associated with the currently selected chip o
the image contained in the firmware image file
 
b Download New Flash Imag
Overwrites the flash memory associated with the currentl
selected chip with a new firmware image file. This menu choic
prompts you for a file name
 
NOTE: The EFI utility does not flash an image that exceeds th
capacity of the flash memory on the selected HBA. Instead,
warning message is displayed
 
IMPORTANT: Refer to "Known Issues and Limitations" section o
the new EFI driver release note before updating
 
c Upload Current Flash Image to a Fil
Saves the image from the flash memory associated with th
currently selected chip to a file. This menu choice prompts yo
for a file name
 
d Erase Entire Flash Par
Erases the entire flash memory associated with the currentl
selected chip. Once the flash memory is erased, you mus
download a new Flash image (select option [b]) before the HBA i
able to function in the boot sequence
 
If you select option (b) to flash an adapter, you are prompted t
enter the firmware image file name. After you enter the file name
the following messages help you identify the adapter being flashe
by its PCI segment, bus, device, and function
 
Updating the adapter at: PCI seg 0x00, bus 0x15, dev 0x01, func 0x0
Updating VPD of NVM with new image version..........
Begin erase cycle..
Erase complete
 
Programming the flash part........................
Start verify cycle...............................................
Verify complete
Programming complete
 
 
At the "Selection: " prompt, enter "q" to return to the main window
Refer to the following example
 
Selection:
 
 
At the "Which chip/adapter (0 to quit)?" prompt, enter "0" to exi
from the EFI utility. Refer to the following example below
 
Which chip/adapter (0 to quit)?
 
 
This displays the following message
 
NOTE: The system needs to be rebooted to ensure system stability
Press ENTER to exit the utility
Exit status code: C00000000000000
 
If the last two characters of the Exit status code are "00", i
indicates that the EFI utility did not encounter any error whil
updating the firmware, or it indicates that you did not select a chi
for flashing before exiting the EFI utility
 
If the last two characters of the Exit status code are other tha
"00" or "02", it indicates that the EFI utility encountered an erro
while updating the firmware. The last flash action might b
successful, the Exist status code indicates error occurred if yo
flashed one or more HBA without exiting the EFI utility
 
NOTE: You must run the efihpvpd.efi utility to get additiona
information on errors before reporting the problem to Hewlett-Packard
Type: Utility - Storage Controlle
 
NOTE: These instructions apply only if you have installed one of th
following Hewlett-Packard SCSI host bus adapters (HBAs) in your H
system from Itanium Processor Family
 
A6828A - Single channel Ultra160 SCSI HBA for HP-U
 
A6829A - Dual channel Ultra160 SCSI HBA for HP-U
 
A8686A - Single channel Ultra160 SCSI HBA for HP-U
(workstations only
 
A7059A - Single channel Ultra160 SCSI HBA for Windows and Linu
 
A7060A - Dual channel Ultra160 SCSI HBA for Windows and Linu
 
A5159B - Dual channel Fast Wide Differential SCSI HBA for HP-UX
Windows, and Linu
 
 
****** EFI Host Bus Adapter Flash Utility Version 01.01.13.00 ******
 
Release date: August 13, 200
 
The EFI Host Bus Adapter (HBA) Flash Utility 01.01.13.00 has th
following major changes in comparison to the 01.01.12.00 version
 
* General Changes
 
(None
 
* Functionality Changes
 
(None
 
* Defects Fixed
 
- Failure on a platform: Immediately after entering the utility, i
is not possible to quit the utility by typing "0"
 
* Restrictions
 
- HP Integrity rx8620 Server and HP Integrity rx7620 Serve
 
To enable faster booting, the system firmware of HP Integrit
rx8620 Server and HP Integrity rx7620 Server does not auto sca
PCI devices with an optional ROM. Therefore, to run the EF
utility, you must first add the device to the table of boo
devices using the "search" and "map" commands
 
For more information, see the "Using the U160 SCSI Add-On Card o
HP Integrity rx8620 Server and HP Integrity rx7620 Server"
document (HP Part Number: 5971-4235)
 
- HP Integrity rx5670 Serve
 
If the HP Integrity rx5670 Server contains a supported HBA, th
following SCSI chips (53C896 and SYMC1010), in addition to othe
SCSI chips, are displayed
 
NOTE: "#" is replaced by a choice number
 
Do not select these four SCSI chips, because they do not hav
flash memory applicable to this utility
 
 
Vendor Devic
Choice ID ID Seg Bus Dev Func Flash Par
---- ------ ------- ------ ----- ----- ----- -----
# 0x1000 0x000B 0x00 0x00 0x02 0x00 Non
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x000B 0x00 0x00 0x02 0x01 Non
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x0021 0x00 0x21 0x01 0x00 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
# 0x1000 0x0021 0x00 0x21 0x01 0x01 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
 
 
- If there are many SCSI HBAs in the system, the SCSI chips choic
list may scroll by too fast, thus hiding the information at th
top of the choice list. Use the Pause key to avoid this problem
 
 
******* EFI Host Bus Adapter Flash Utility Version 01.01.12.00 *****
 
The EFI Host Bus Adapter (HBA) Flash Utility 01.01.12.00 has th
following major changes in comparison to the 01.01.10 version
 
* General Changes
 
- The version number is displayed on the screen containing the SCS
chips choice list
 
- The PCI Segment number is displayed in the SCSI chips choice lis
and the progress message
 
 
* Functionality Changes
 
- When an error occurs, the utility pauses for the keyboard inpu
from the user, instead of a delay and auto continue
 
- The help screen does not hide the first few lines of informatio
by scrolling down
 
- When the utility exits, it displays the "Exit Status Code" tha
explains the success or failure of execution
 
- When the utility exits, it returns a buffer in a global syste
variable. This variable contains the execution status and th
Seg/Bus/Dev entry for adapters that fail the flash process
 
 
* Defects Fixed
 
- Intermittent failure for the "Download New Flash Image" operatio
when flashing a new image to an HBA that uses an AT29C010 flas
memory
 
 
* Restrictions
 
- If the HP Integrity rx5670 system contains a supported HBA, th
following SCSI chips (53C896 and SYMC1010), in addition to othe
SCSI chips, are displayed
 
NOTE: "#" is replaced by a choice number
 
Do not select the following SCSI chips because they do not hav
a flash memory applicable to this utility
 
 
Vendor Devic
Choice ID ID Seg Bus Dev Func Flash Par
---- ------ ------- ------ ----- ----- ----- -----
# 0x1000 0x000B 0x00 0x00 0x02 0x00 Non
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x000B 0x00 0x00 0x02 0x01 Non
LSI Logic, Inc. 53C896 Ultra2 SCS
# 0x1000 0x0021 0x00 0x21 0x01 0x00 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
# 0x1000 0x0021 0x00 0x21 0x01 0x01 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
 
 
- If there are many SCSI HBAs in the system, the SCSI chips choic
list may scroll by too fast, thus hiding the information at th
top of the choice list. Use the Pause key to avoid this problem
 
- In the SCSI chips choice list, you cannot select the SCSI chip
that have a choice number greater than 999
 
To select SCSI chips that originally have a choice number greate
than 999, remove HBAs that are associated with the first 99
entries in the SCSI chips choice list
 
 
********** Using the EFI Host Bus Adapter Flash Utility ***********
 
This document provides instructions for using the Extended Firmwar
Interface (EFI) based LSI Logic flash utility. This EFI flash utilit
is used for flashing and saving firmware images on HP HBAs based o
LSI Logic's 53C876 and 53C1010 SCSI chips
 
 
********************* Features ************************************
 
- Displays the firmware version on an HBA or in a firmware image file
 
- Supports a menu driven mode
 
- Enables you to flash the EFI option ROM images
 
 
***************** Description **************************************
 
This utility allows you to update the HBA flash memory with the LS
Logic EFI driver. New versions of these images are release
periodically
 
Your HBA must have a flash memory to use this utility
 
WARNING: Do not attempt to use this utility to flash binaries othe
than the EFI option ROM images
 
The executable file name of the EFI utility is EFI8XXFL.EFI. Thi
file, and any firmware image file you need, should be stored on
diskette or CD-ROM
 
These files should not be stored on a hard disk, because if the flas
fails, these files cannot be recovered. Moreover, the hard dis
may not be accessible
 
You must execute the EFI utility from a diskette or CD-ROM. Fo
EFI-based systems without a floppy diskette drive, burning the EF
utility and other firmware images onto a CD-ROM will allow prope
execution, but with reduced functionality. In such a situation, yo
will not be able to save an image of the flash memory to the CD-ROM
 
 
************** Preparation **************************************
 
When you boot the EFI enabled systems, the diskette or CD-RO
containing the EFI utility must be in the drive to allow devic
mapping. The EFI utility and firmware image files will be located i
the root directory or in a subdirectory on the diskette or CD-ROM
 
Boot the system to the EFI shell prompt. The floppy diskette drive o
CD-ROM drive should appear in the list of mapped devices as "fs0"
 
In systems with a floppy drive, change to this device by typin
"fs0:"
 
 
************** Menu Driven Mode **********************************
 
If the EFI utility and firmware image files are located in the roo
directory, enter the "efi8xxfl" command at the prompt as illustrate
below; otherwise, move to the directory in which these files ar
located and continue
 
NOTE: As described in "Restrictions" section, you must execut
the following two commands at the prompt before enterin
the "efi8xxfl" command on HP Integrity rx8620 Server o
HP Integrity rx7620 Server
 
fs0:> search al
fs0:> map -
 
If you fail to execute these two commands, the following messag
appears, even if the system has an HBA
 
"ERROR: No LSI Logic 8xx/1010 boards found."
 
 
fs0:> efi8xxf
 
If the EFI utility does not find an HBA with a flashable component
the following message appears
 
ERROR: No LSI Logic 8xx/1010 boards found
Press ENTER to continue..
NOTE: The system needs to be rebooted to ensure system stability
Press ENTER to exit the utility
Exit status code: C00000000000000
 
 
If an HBA with a flashable component is found, the following scree
appears
 
 
EFI8XXFL-1.01.13.0
 
Vendor Devic
Choice ID ID Seg Bus Dev Func Flash Par
------- -------- ------- ----- ------ ----- ------ ---------
1 0x1000 0x0021 0x00 0x15 0x01 0x00 M29F010
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
2 0x1000 0x0021 0x00 0x15 0x01 0x01 M29F010
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
3 0x1000 0x0021 0x00 0x3F 0x01 0x00 Am29F01
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
4 0x1000 0x0021 0x00 0x3F 0x01 0x01 Am29F01
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
5 0x1000 0x0021 0x00 0x21 0x01 0x00 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
6 0x1000 0x0021 0x00 0x21 0x01 0x01 Non
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
7 0x1000 0x0021 0x01 0x16 0x01 0x00 Am29F01
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCS
 
8 - Refres
 
Which chip/adapter (0 to quit)
 
 
The version of the EFI flash utility is shown at the upper-left corne
of the main window
 
The main window allows you to choose the SCSI chip corresponding t
the path where you want to perform the selected tasks. Dual channe
cards will have two entries displayed on this screen, one for eac
SCSI chip
 
In the example above, the system has four HBAs - one each on th
0x15, 0x3F, and 0x21 buses in PCI segment 0, and one on the 0x16 bu
in PCI segment 1
 
The HBA on bus 0x3F is a dual-channel HBA (func 0x00 and func 0x01
with flash memory part number Am29F010. Since both the channels of
dual channel board share the same flash memory, only one of the path
needs to be chosen
 
If separate updates are performed through both the paths, the flas
memory is not affected. However, be aware that each update overwrite
the existing contents of the flash memory
 
The HBA on bus 0x21 is a dual-channel HBA (func 0x00 and func 0x01
without any flash memory, indicated as "None" under the "Flash Part"
column. The utility will refresh the main window if Choice number
or 6 is selected
 
The segment value of the HBA corresponding to Choice number 7 i
"0x01". This indicates that the HBA resides on PCI segment 1. Th
other HBAs reside on PCI segment 0, as the segment value for othe
HBAs is 0x00
 
The "SYMC1010" following "LSI Logic, Inc." indicates that the HBAs us
the 53C1010 LSI SCSI chip, which is supported by this EFI utility
 
At the "Which chip/adapter (0 to quit)?" prompt, enter the Choic
number that corresponds to the SCSI chip associated with the flas
memory you want to update. Refer to the following example wher
chip 1 is selected
 
Which chip/adapter (0 to quit)?
 
 
The following menu is displayed
 
LSI Logic Corporation EFI 53C8xx/53C1010 FLASH Utility
EFI8XXFL- 1.01.13.00 (08.13.2003
Copyright (c) 2002 LSI Logic Corporation. All rights reserved
 
**************************************************************
FLAS
a - Identify Flash Imag
b - Download New Flash Imag
c - Upload Current Flash Image to a Fil
d - Erase Entire Flash Par
MIS
z - Change Current PCI chip/adapte
q - Qui
 
Selection
 
 
The banner at the top of the option menu displays the version of th
EFI flash utility and the release date
 
The details on each of the menu choices are as follows
 
a Identify Flash Imag
Displays the version number of the image in the flas
memory associated with the currently selected chip o
the image contained in the firmware image file
 
b Download New Flash Imag
Overwrites the flash memory associated with the currentl
selected chip with a new firmware image file. This menu choic
prompts you for a file name
 
NOTE: The EFI utility does not flash an image that exceeds th
capacity of the flash memory on the selected HBA. Instead,
warning message is displayed
 
IMPORTANT: Refer to "Known Issues and Limitations" section o
the new EFI driver release note before updating
 
c Upload Current Flash Image to a Fil
Saves the image from the flash memory associated with th
currently selected chip to a file. This menu choice prompts yo
for a file name
 
d Erase Entire Flash Par
Erases the entire flash memory associated with the currentl
selected chip. Once the flash memory is erased, you mus
download a new Flash image (select option [b]) before the HBA i
able to function in the boot sequence
 
If you select option (b) to flash an adapter, you are prompted t
enter the firmware image file name. After you enter the file name
the following messages help you identify the adapter being flashe
by its PCI segment, bus, device, and function
 
Updating the adapter at: PCI seg 0x00, bus 0x15, dev 0x01, func 0x0
Updating VPD of NVM with new image version..........
Begin erase cycle..
Erase complete
 
Programming the flash part........................
Start verify cycle...............................................
Verify complete
Programming complete
 
 
At the "Selection: " prompt, enter "q" to return to the main window
Refer to the following example
 
Selection:
 
 
At the "Which chip/adapter (0 to quit)?" prompt, enter "0" to exi
from the EFI utility. Refer to the following example below
 
Which chip/adapter (0 to quit)?
 
 
This displays the following message
 
NOTE: The system needs to be rebooted to ensure system stability
Press ENTER to exit the utility
Exit status code: C00000000000000
 
If the last two characters of the Exit status code are "00", i
indicates that the EFI utility did not encounter any error whil
updating the firmware, or it indicates that you did not select a chi
for flashing before exiting the EFI utility
 
If the last two characters of the Exit status code are other tha
"00" or "02", it indicates that the EFI utility encountered an erro
while updating the firmware. The last flash action might b
successful, the Exist status code indicates error occurred if yo
flashed one or more HBA without exiting the EFI utility
 
NOTE: You must run the efihpvpd.efi utility to get additiona
information on errors before reporting the problem to Hewlett-Packard
Правовая информация:Все програмное обеспечение, размещённое на Driver.ru является бесплатным. Все названия и торговые марки принадлежат их владельцам.
Внимание:Некоторые программы получены из непроверенных источников. Мы не гарантируем их совместимость и работоспособность. Всегда проверяйте загруженные файлы с помощью антивирусных программ. Мы не несём никакой ответственности за возможные потери, возникшие в результате установки загруженных программ. Загрузка файла с Driver.ru обозначает вашу информированность об этом и согласие с данными условиями.
Похожие файлы:
Тип программы:System and BMC Firmware Update
Версия:2.21 EFI
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:System and BMC Firmware Update for HP zx6000
Type: Firmware - System
System and BMC Firmware Скачать HP zx6000 System and BMC Firmware Update v.2.21 EFI
Type: Firmware - System
System and BMC Firmware Скачать HP zx6000 System and BMC Firmware Update v.2.21 EFI
Тип программы:Firmware (EFI Boot Service Driver)
Версия:1.04.01.00
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:Firmware (EFI Boot Service Driver) for HP zx6000
Type: Firmware - Controller
Firmware for LSI Logic U160 SCSI controller Скачать HP zx6000 Firmware (EFI Boot Service Драйвер) v.1.04.01.00
Type: Firmware - Controller
Firmware for LSI Logic U160 SCSI controller Скачать HP zx6000 Firmware (EFI Boot Service Драйвер) v.1.04.01.00
Тип программы:Management Processor Card Firmware
Версия:E.02.29
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:Management Processor Card Firmware for HP zx6000
Type: Firmware - Management
Management Processor Card Firmware Скачать HP zx6000 Management Processor Card Firmware v.E.02.29
Type: Firmware - Management
Management Processor Card Firmware Скачать HP zx6000 Management Processor Card Firmware v.E.02.29
Название:ATI FireGL Driver (IA-64 Itanium)
Версия:8.02.3 Rev. A
Система:Windows XP 64-bit
Описание:ATI FireGL Driver (IA-64 Itanium) for HP zx6000
Type: Driver - Graphics - AMD
This SoftPaq contains the driver for ATI FireGL X1/Z1 graphics for the listed workstation models and operating systems. Скачать HP zx6000 ATI FireGL Драйвер (IA-64 Itanium) v.8.02.3 Rev. A
Type: Driver - Graphics - AMD
This SoftPaq contains the driver for ATI FireGL X1/Z1 graphics for the listed workstation models and operating systems. Скачать HP zx6000 ATI FireGL Драйвер (IA-64 Itanium) v.8.02.3 Rev. A
Название:U160 SCSI controller VPD (Vital Product Data)
Версия:1.00.03
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:U160 SCSI controller VPD (Vital Product Data) for HP zx6000
Type: Utility - Storage Controller
NOTE: These instructions apply only if you have installed one of the
following Hewlett-Packard SCSI host bus adapters (HBAs) in your system
from HP Itanium Processor Family:
A6828A - Single channel Ultra160 SCSI HBA for HP-UX
... Скачать HP zx6000 U160 SCSI controller VPD (Vital Product Data) v.1.00.03 драйвер
Type: Utility - Storage Controller
NOTE: These instructions apply only if you have installed one of the
following Hewlett-Packard SCSI host bus adapters (HBAs) in your system
from HP Itanium Processor Family:
A6828A - Single channel Ultra160 SCSI HBA for HP-UX
... Скачать HP zx6000 U160 SCSI controller VPD (Vital Product Data) v.1.00.03 драйвер
Тип программы:Firmware (EFI Boot Service Driver)
Версия:1.03.01.00
Система:HP-UX 11.x, OS Independent, Red Hat Enterprise Linux 3 (Itanium)Red Hat Enterprise Linux WS 2.1-Itanium
Описание:Firmware (EFI Boot Service Driver) for HP zx6000
Type: Firmware - Controller
Firmware for LSI Logic U160 SCSI controller Скачать HP zx6000 Firmware (EFI Boot Service Драйвер) v.1.03.01.00
Type: Firmware - Controller
Firmware for LSI Logic U160 SCSI controller Скачать HP zx6000 Firmware (EFI Boot Service Драйвер) v.1.03.01.00
Название:NVIDIA IA-64 Graphics Driver
Версия:53.18 Rev. 1
Система:Windows XP 64-bit
Описание:NVIDIA IA-64 Graphics Driver for HP zx6000
Type: Driver - Graphics - Nvidia
This contains the NVIDIA graphics driver for the Itanium workstation models and operating systems listed. Скачать HP zx6000 NVIDIA IA-64 Graphics Драйвер v.53.18 Rev. 1
Type: Driver - Graphics - Nvidia
This contains the NVIDIA graphics driver for the Itanium workstation models and operating systems listed. Скачать HP zx6000 NVIDIA IA-64 Graphics Драйвер v.53.18 Rev. 1
Тип программы:BIOS
Версия:5.00 Rev 1
Система:BIOS
Описание:BIOS for HP zx6000
Type: BIOS
This contains the EFI version of the NVIDIA Video BIOS Flash Utility for the Itanium-based (IA-64) workstations listed. This flash utility may be used with the same NVIDIA video BIOS images that are provided for x86 systems. Скачать HP zx6000 BIOS v.5.00 Rev 1
Type: BIOS
This contains the EFI version of the NVIDIA Video BIOS Flash Utility for the Itanium-based (IA-64) workstations listed. This flash utility may be used with the same NVIDIA video BIOS images that are provided for x86 systems. Скачать HP zx6000 BIOS v.5.00 Rev 1
Название:KYE Systems Corp SoundMax 5.1 Audio and Joystick driver
Версия:5.0.1319.209 Rev. A
Система:Windows XP 64-bit
Описание:KYE Systems Corp SoundMax 5.1 Audio and Joystick driver for HP zx6000
Type: Operating System - Enhancements
Enables support for the KYE Systems Corp SoundMax 5.1 Audio and Joystick cards. This driver is to be used in the Windows XP 64-Bit edition 2003 for Itanium. Скачать HP zx6000 KYE Systems Corp SoundMax 5.1 Audio and Joystick драйвер v.5.0.1319.209 Rev. A
Type: Operating System - Enhancements
Enables support for the KYE Systems Corp SoundMax 5.1 Audio and Joystick cards. This driver is to be used in the Windows XP 64-Bit edition 2003 for Itanium. Скачать HP zx6000 KYE Systems Corp SoundMax 5.1 Audio and Joystick драйвер v.5.0.1319.209 Rev. A
Тип программы:BIOS
Версия:1.04 Rev. A
Система:BIOS
Описание:BIOS for HP zx6000
Type: BIOS
This contains the ATI Radeon 7000 Video BIOS and EFI Flash Utility for the workstations listed below. Скачать HP zx6000 BIOS v.1.04 Rev. A
Type: BIOS
This contains the ATI Radeon 7000 Video BIOS and EFI Flash Utility for the workstations listed below. Скачать HP zx6000 BIOS v.1.04 Rev. A